Finned Tubes

Continuous Spiral Crimped Fins

These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.

Continuous Spiral G Type Fins

The strip is tension wound into a machined groove over the base tube material. This ensures maximum heat transfer at high temperature.

Continuous Spiral L Type Fins

The formation of ‘L’ base of the strip under tension gives optimum contact of the ‘L’ base on the base to improve the heat transfer efficiency.

Square / Rectangular Fins

These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.

Wire Wound Finned Tubes

These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.

Continuous Spiral Crimped Fins

These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.



Heat Exchangers

Steam Thermic Fluid Heated Air Heaters

Equipments used for heating Air by using Steam Or Thermic Fluid as the heating medium. Finned tubes are used as the heat transferring media to the air.

Multiple Cell Heat Exchangers

The strip is tension wound into a machined groove over the base tube material. This ensures maximum heat transfer at high temperature.

Air Coolers Or Condensers

Used for Air Cooling applications and for Moisture removal. These Heat Exchangers mainly have finned tubes with Aluminium fins. Material of construction changes based on the application

Heat Exchangers For Heat Recovery

These Heat Exchangers are specially designed with specific material selection to handle high temperatures beyond 350 ° C.

Heat Exchangers With ‘U’ Tube Construction

These Heat Exchangers are used in Air Heating applications when using Liquid as heating medium Or for oil cooling applications.

Shell & Tube Type Heat Exchangers

We can fabricate different type of Shell and Tube Heat Exchangers as per customer requirements and Drawing,

Sheet Metal / Pressed Component

We also manufacture many kinds of pressed components, we have Power Presses of different capacity ranging from 10Tons – 100 Tons.

Fabrications of Tanks and Storage Vessels

We have capacity to undertake any kind of fabrication job like Structures, Skids, Tanks etc weighing up to 20 Tons. We have specialized ourselves in fabrications of Tanks and Bulk Storage Vessels.

CONTACT

Address : Plot No. R -71, TTC Industrial Area, MIDC, Rabale, Navi Mumbai - 400 701 Maharashtra, India. * Tel : +91 22 27603136 / 6529 1171 * Fax : +91 22 27603893 * Mobile : +91 98218 76052 * Email : response@thermotech-finnedtubes.com